|
Getting Palm Pre data working on Boost Mobile
|
| Admin |
Posted on 26-01-2010 11:23
|
Super Administrator
Posts: 15
Joined: 25.01.10
|
After following the guide to get your Palm Pre working on Boost Mobile we are stuck with no data. Use this thread to discuss solutions. I have attached the default ##DATA# settings as seen from QPST.
There are two data profiles and both have the same settings. Palm Pre seems to look at profile 1 to verify if its going to connect. If its modified then it will not connect. We have to find a way to create a new profile and set it as the default profile but when doing that via QPST it doesnt stick.
Admin attached the following image:
[38.66Kb]
|
| |
|
|
| maine200212 |
Posted on 01-02-2010 10:24
|
Member
Posts: 11
Joined: 29.01.10
|
Try to use QPST, leave Profile 0 alone, change profile 1 nai to a 10 digit number@sprintpcs.com, leave tether nai alone, MN-HA SPI to C, MN-AAA SPI to 2, DMU Public key 0 and DMU Mobile nothing. Profile 2 try channging everything to the boost mobile settings. amek all three profiles enable, but profile 2 as user active. Maybe this will work |
| |
|
|
| Admin |
Posted on 01-02-2010 17:01
|
Super Administrator
Posts: 15
Joined: 25.01.10
|
Okay now I have a bigger problem, the phone updated itself to the latest version. now im unable to put the phone in diagnostic mode for qpst. the esn/meid is still intact, in ##debug# it actually shows the real meid now so everything is good but no diagnostic mode for now. |
| |
|
|
| maine200212 |
Posted on 01-02-2010 18:20
|
Member
Posts: 11
Joined: 29.01.10
|
Did you try to reinstall novacom and palm sdk and put the novaterm back in the bin folder of the palm sdk? |
| |
|
|
| Admin |
Posted on 02-02-2010 12:34
|
Super Administrator
Posts: 15
Joined: 25.01.10
|
Okay I did that but every time I try to turn diag mode on with mpt it returns "com.palm.usbpassthrough is not running". I'm lost now, ill keep playing with it see if I can fix this problem.
Goto the webOS section in downloads to get mpt back on the Palm Pre: http://clipze.com/hackerz/downloads.php?cat_id=6
Edited by Admin on 02-02-2010 12:53 |
| |
|
|
| maine200212 |
Posted on 03-02-2010 08:21
|
Member
Posts: 11
Joined: 29.01.10
|
I ran into that problem. I just re-installed the webos file on my pre, and everything worked perfect |
| |
|
|
| Admin |
Posted on 03-02-2010 15:33
|
Super Administrator
Posts: 15
Joined: 25.01.10
|
is there a latest webos doctor with activation bypass around? |
| |
|
|
| maine200212 |
Posted on 03-02-2010 17:11
|
Member
Posts: 11
Joined: 29.01.10
|
i have 1, pm me with your email, ill email it to you. its 1.3.5.1 though |
| |
|
|
| Admin |
Posted on 04-02-2010 14:24
|
Super Administrator
Posts: 15
Joined: 25.01.10
|
sent.
edit: did a hard reset to see what would happen and it restored the original meid but kept the new esn thus bricked the radio. plus phone doesnt start with the meid/esn dont match so going to flash back to 1.0.3 now and start from scratch. I think the same thing would happen with the doctor, only way to get the latest version for now is to update through phone and even that would break the diagnostic mode so we have to find fixes for these small problems.
Edited by Admin on 04-02-2010 16:09 |
| |
|
|
| giddiani |
Posted on 21-03-2010 07:35
|
Member
Posts: 1
Joined: 21.03.10
|
hey my friend, im from mexico and I had been looking for this webos doctor 1.3.5.1, could you please help me sharing it? (excuse my bad english) my email is tuahil@gmail.com |
| |
|
|
| Admin |
Posted on 24-04-2010 19:03
|
Super Administrator
Posts: 15
Joined: 25.01.10
|
maine200212 wrote:
i have 1, pm me with your email, ill email it to you. its 1.3.5.1 though
upload it to megaupload or something. |
| |
|
